build-steps:install_trim_panels_above_slider_door
Differences
This shows you the differences between two versions of the page.
| build-steps:install_trim_panels_above_slider_door [2025/11/14 18:47] – created 98.97.25.124 | build-steps:install_trim_panels_above_slider_door [2025/11/14 20:48] (current) – 98.97.25.124 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | Cut top edge on the table saw with the blade at 30 degrees and fence at 115mm. Cut along top edge with laser grain facing up. | + | Cut top edge on the table saw with the blade at 30 degrees and fence at 111mm. Cut along top edge with laser grain facing up. |
/home/mediumgg/public_html/data/pages/build-steps/install_trim_panels_above_slider_door.txt · Last modified: by 98.97.25.124