Differences

This shows you the differences between two versions of the page.

--- build-steps:power_plate_assembly [2025/08/18 00:05] – admin
+++ build-steps:power_plate_assembly [2025/08/19 00:13] (current) – admin
@@ Line 6: / Line 6: @@
 Mount Inverter with 6 [[Hardware:screw-13]] screws into the pre-drilled holes in the power plate.
+Mount Victron componets with [[Hardware:screw-13]]
+Mount Breakers with [[Hardware:screw-22]]
+Mount 24V -> 12V converter with [[Hardware:screw-8]]
+Set battery type selector to 7
+Start with charge current at mid-point
+Dip switches:
+Sw1 - 1
+Sw2 - 0
+Sw3 - 0
+Sw4 - 1
+Sw5 - 0
+Awg red and black, 1/0 red and black, 12 Awg red and black, 6 Awg red and black, Yellow eye crimps (#10, ¼, 5/16), 6 Awg lug (5/16), 6 Awg Anderson pins and housing, 1/0 lugs (⅜, 5/16), 14/3 wire, 10/3 wire, 16/5 wire, 16/2 wire, Anderson pins (all 3 sizes), Red eye crimps (#8, 1/4), Anderson housings (white, black, grey, red, yellow, blue), 50amp breakers, Victron Shunt, DC/DC charger, Solar charge controller, 24->12 converter, Inverter, 6 position fuse boxes, screw mount zip ties, #10 x ½ truss head screws, ⅝ #8 flat head screws, ¾ x #8 pan head screws,
+Quick reference:
+Black 12v water pump (10amp) \\
+Red 12V sockets 15amp \\
+Yellow 24V USB-C 20amp \\
+Blue 12v lights (5amp) \\
+White 24v fan (10amp) \\