[[Hardware:screw-13]] (10 truss head 1/2") victron mounting screws \\

Tools

Long 1/4 drive extension with #2 philips bit

Mount Inverter with 6 [[Hardware:screw-13]] screws into the pre-drilled holes in the power plate.

Mount Victron componets with [[Hardware:screw-13]]

Mount Breakers with [[Hardware:screw-22]] 

Mount 24V -> 12V converter with [[Hardware:screw-8]]



Set battery type selector to 7
Start with charge current at mid-point
Dip switches:
Sw1 - 1
Sw2 - 0
Sw3 - 0
Sw4 - 1
Sw5 - 0


10 Awg red and black, 1/0 red and black, 12 Awg red and black, 6 Awg red and black, Yellow eye crimps (#10, ¼, 5/16), 6 Awg lug (5/16), 6 Awg Anderson pins and housing, 1/0 lugs (⅜, 5/16), 14/3 wire, 10/3 wire, 16/5 wire, 16/2 wire, Anderson pins (all 3 sizes), Red eye crimps (#8, 1/4), Anderson housings (white, black, grey, red, yellow, blue), 50amp breakers, Victron Shunt, DC/DC charger, Solar charge controller, 24->12 converter, Inverter, 6 position fuse boxes, screw mount zip ties, #10 x ½ truss head screws, ⅝ #8 flat head screws, ¾ x #8 pan head screws, 


Quick reference:
Black 12v water pump (10amp) \\
Red 12V sockets 15amp \\
Yellow 24V USB-C 20amp \\
Blue 12v lights (5amp) \\
White 24v fan (10amp) \\