screw-13 (10 truss head 1/2“) victron mounting screws
Tools
Long 1/4 drive extension with #2 philips bit
Mount Inverter with 6 screw-13 screws into the pre-drilled holes in the power plate.
Mount Victron componets with screw-13
Mount Breakers with screw-22
Mount 24V → 12V converter with screw-8
Set battery type selector to 7 Start with charge current at mid-point Dip switches: Sw1 - 1 Sw2 - 0 Sw3 - 0 Sw4 - 1 Sw5 - 0
10 Awg red and black, 1/0 red and black, 12 Awg red and black, 6 Awg red and black, Yellow eye crimps (#10, ¼, 5/16), 6 Awg lug (5/16), 6 Awg Anderson pins and housing, 1/0 lugs (⅜, 5/16), 14/3 wire, 10/3 wire, 16/5 wire, 16/2 wire, Anderson pins (all 3 sizes), Red eye crimps (#8, 1/4), Anderson housings (white, black, grey, red, yellow, blue), 50amp breakers, Victron Shunt, DC/DC charger, Solar charge controller, 24→12 converter, Inverter, 6 position fuse boxes, screw mount zip ties, #10 x ½ truss head screws, ⅝ #8 flat head screws, ¾ x #8 pan head screws,
Quick reference:
Black 12v water pump (10amp)
Red 12V sockets 15amp
Yellow 24V USB-C 20amp
Blue 12v lights (5amp)
White 24v fan (10amp)