build-steps:power_plate_assembly
This is an old revision of the document!
screw-13 (10 truss head 1/2“) victron mounting screws
Tools
Long 1/4 drive extension with #2 philips bit
Mount Inverter with 6 screw-13 screws into the pre-drilled holes in the power plate.
Set battery type selector to 7 Start with charge current at mid-point Dip switches: Sw1 - 1 Sw2 - 0 Sw3 - 0 Sw4 - 1 Sw5 - 0
/home/mediumgg/public_html/data/attic/build-steps/power_plate_assembly.1755475583.txt.gz · Last modified: by admin