Medium Van Build Instructions

Tools Template
Countersink bit, T20 bit, 1/4 drill, 1/4 driver, razor blade,

Hardware Template
dog bowl screws, 1/4 x 1 dowels,

Equipment Template

Bulk Template

Supplies Template

Here is where to put details that you will likely need to look back at even once you've done this step many times before like measurements or gotchas that you've experienced

Here's an example of an embeded photo that is a thumbnail that can be clicked on to get a closer look.

* Trim off tabs on parts from CNC * Lay out parts on work table and tap them together with a small mallet and pure-drill and screw them together. (photo 12:33 10-6) This is a step by step list to do the step along with embeded photos and videos as necessary.

Make better way to locate ceiling into van.